Hand Pump 4500Psi High Pressure 3-Stage Air Gun Rifle Pump Filling Stirrup Charger PCP Hand Pump Airguns, 2-Yr Warranty

Product Information

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. The Equalizer Hydraulic Single-Port Hand-Pump range is tailored for use with Equalizer International hydraulic equipment. Once inflated to approximately 5psi, the single action inflation mode can be used to achieve the high pressure needed by inflatable paddleboards and other inflatable products.

The pump is fitted with an analogue pressure gauge with a maximum reading of 160 psi /11 bar, and a generous 60cm long rubber hose, fitted with a double-head connector for use with both Schrader and Presta valves. From paddling pools to steel-framed swimming pools, we have everything you need to enjoy the summer season. Enerpac Hand Pump in 303 Stainless Steel construction for use with a wide variety of fluids including distilled water, diesters, silicones, soluble oils and petroleum.The GE Druck PV 212 hydraulic hand pump is lightweight, easy to use and generates pressure up to 1000 bar. The Equalizer Hydraulic Twin-Port Hand-Pump range is tailored for use with Equalizer International hydraulic equipment. Generous 60cm long rubber hose, fitted with a double head connector for use with both Schrader and Presta valves.

I couldn't shoot straight for about 15 minutes after pumping the rifle up, though I guess I did rush a bit. I have the Walther Reign which has a tank that holds 230cc, this pump will fill it up with about 30 pumps or so. If you require a product not listed or to a modified specification please contact our sales office on +44 (0) 1204 699959 who will be happy to advise.

Stainless steel construction on the 11100 and 11400 models enable use with many different fluids - such as distilled water, alcohol, diesters, silicones, soluble oils, and petroleum. Edit: I have now used this pump a few times over a few months and am as happy as I first was with the pump, considering how little it cost over an expensive one in a local gunsmiths this has paid for itself already. Compact size with folding base design, with flexible micro-bore hose, portable for carrying and convenient filling.

The S-525-JB Hand Pump has improved alignment through a new peek bushing and a polyurethane seal, which will provide improved seal life. The pump is fitted with an analogue pressure gauge with a maximum reading of 160 psi -11 bar and a generous 60cm long rubber hose, fitted with a double head connector for use with both Schrader and Presta valves. This Faithfull High-Pressure Hand Pump features a large air cylinder with a long plunging action, providing rapid inflation, and achieving a high-pressure output of up to 160 psi / 11 bar.

A large selection of hydraulic hand pumps makes it easy to find the most effective compact high pressure pump. The hose attachment has a male 1/8" BSP type thread at the pump end, same as the pressure gauge which fits into the same block. threaded port is provided in the air cylinder body as standard to separate the air drive from the liquid section. Some mention that it was very easy to assemble even though the instruction leaflet was in Chinese English, while others say that the instructions are hopeless and quite a lot of effort is involved in using the pump. The diaphragm oil-reservoir design means that, unlike conventional units, the hand-pumps are operable at all angles and are highly resistant to accidental spillage of hydraulic fluid.