Seagate ST500LM021 500GB Internal Hard Drive 2.5" HDD, SATA III - 6Gbs, 32MB Cache, 7200RPM, OEM

Product Information

If two drives are attached on one Serial ATA host adapter, the host operating system views the two devices as if they were both “masters” on two separate ports. WAARSCHUWING: net als bij alle firmware-updates is het raadzaam dat u back-ups of kopieën van alle belangrijke bestanden maakt voordat u deze update uitvoert.

Seagate ST500LM021 Laptop Thin SATA III 7mm 500GB 2.5-Inch Seagate ST500LM021 Laptop Thin SATA III 7mm 500GB 2.5-Inch

Maak een einde aan de kosten en complexiteit van het opslaan, verplaatsen en activeren van gegevens op schaal. Als u akkoord gaat, klikt u op "Ik accepteer de voorwaarden van de licentieovereenkomst" en klikt u vervolgens op Volgende. Please use the following links and instructions below to determine if firmware is available for your product. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disk drive in your current system and expect all of your existing applications to work as normal. When the first Momentus XT hybrid came to market, SSDs were relatively young and the cost imbalance still favored hard drives for the masses, especially the new Seagate hybrids that could tack on additional performance gains over pure platter plays.Behind the scenes though, we did notice that before the data was cached, the initial transfer speed was slightly slower than the original 7,200RPM-based models and took much longer to be absorbed as “hot data”.

Seagate Laptop Thin HDD SATA

This situation, in part, was based on a lack of friendly firmware download tools and operating system limitations. This test includes: a three hour period operating in an office productivity environment with 32-bit Vista running Outlook 2007 connected to an Exchange server, web browsing using Chrome and IE8, editing files within Office 2007, viewing PDFs in Adobe Reader, and an hour of local music playback with two hours of additional online music via Pandora. Wanneer u er klaar voor bent om de firmware-update te starten, schakelt u het selectievakje Procedure voor firmware-update starten in en klikt u vervolgens op Doorgaan.

Additionally, as stated above and in our news release for the Seagate SSHD Gen3 line, the NAND is MLC, not SLC as in the previous generation. However, SSHD technology is not a cure-all, which Seagate readily admits; users craving extreme performance will likely desire more than an SSHD provides.